The printer requires the following features:
- ethernet cable connection
- ZPL support
Depending on the specific use, the printer must support thermal transfer printing.
This is the case with IdTag stickers.
If your printer has these features, there is a good chance that it will work directly with the Smake system without any additional settings.
For the configuration of the label printers, please refer to the manual of the respective printer.
For the use in the Smake system it is necessary that the printer is accessible from the Production Server via the network.
Currently we can confirm the following printers:
- TSC TC200
- Zebra GX420t
- Zebra GK420t