Oliver Schipper
- Total activity 55
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 34
Activity overview
Latest activity by Oliver Schipper-
Oliver Schipper created an article,
EPS IP address change
Setting up the TouchBox when the EPS is connected to the network. When the TouchBox is booted, start the Setup Wizard. Start the Configuration. In the next step select the operating mode "Sma...
-
Oliver Schipper created an article,
Match profiles with Epson F3000 / F2100 / F2000
Open the EPS software on your PC and go to the Profile tab.Create a new profile and fill the input field "Profile-Identifier" with a value of your choice,You will need this later to match the profi...
-
Oliver Schipper created an article,
Setting up the TouchBox for the Jump EPS
The setup of the TouchBox is described in 2 chapters. Part 1 - Setting up the TouchBox when the Jump EPS is connected to the network. Part 2 - Setting up the TouchBox when the Jump EPS is used as s...
-
Oliver Schipper created an article,
HoopStation - Projector settings (ASUS)
Installation instructions for Asus-Projector Adjust the image focusMove the focus ring to the left or to the right to adjust the image focus. Control panel grid The control panel grid guides...
-
Oliver Schipper created an article,
Mount the IR-Cap
To protect the infrared transmitter from light, mount the IR cap over the infrared transmitter. Attach the cap using the USB port
-
Oliver Schipper created an article,
HoopStation Technical data
Technical data HoopStation: Brand Smake Type HoopStation Product family EPS Power supply 110-240V ∼ 50-60Hz 1.5A Environment +5°C - +35°C / 30% - 70% Humidity Delivery contents ...
-
Oliver Schipper created an article,
EPS Tree file naming / control
There are several ways to control the EPS tree with the file name. The basic structure of the file is always: description1_description2_width_height.png These values must always be specified, the u...
-
Oliver Schipper created an article,
HoopStation EPS Assembly instructions
Requirements To operate the HoopStation you need the Mighty Hoop HoopMaster Station and the 5.5“ frame. Preparations Base HoopMaster Fixture Station TouchBox Optional U...
-
Oliver Schipper created an article,
TouchBox Update
Connect the TouchBox to your network via Ethernet cable. Start the TouchBox In the user interface of the TouchBox there are 2 icons The icon (1) indicates whether an Internet connection is a...
-
Oliver Schipper created an article,
USB Stick
Please use a USB stick which is formatted with the FAT32 file system. To format your USB drive to FAT32, follow the steps below: Step 1: Connect your USB drive to the device and click on Open fo...